Kontaktaufnahme

Live-Chat mit Tektronix-Vertretern. Verfügbar von 09:00 - 17:00 Uhr CET.

Anrufen

Kontaktieren Sie uns telefonisch unter

Verfügbar von 9:00 bis 17:00 Uhr CET Geschäftstage

Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

DOWNLOADTYP
MODELL ODER SCHLÜSSELWORT

Feedback

Why does the DPO2000 or MSO2000 series oscilloscope sometimes present the record length selections as 100k and 1.00M but other times it presents 125k and 1.25M+ or 125k and 1.00M?

Frage:

Why does the DPO2000 or MSO2000 series oscilloscope sometimes present the record length selections as 100k and 1.00M but other times it presents 125k and 1.25M+ or 125k and 1.00M?

Antwort:

Here are the rules to understand when a record length is available:

For the "short" record lengths:
100k record lengths: Time/Div <= 40us (40 us/div and faster)
125k record lengths: Time/Div >= 100us (100 us/div and slower)

For the "long" record lengths:
1.00M record lengths: Time/Div <= 400us (400 us/div and faster)
1.25M record lengths: Time/Div >= 1ms (1 ms/div and slower)

The reason for the longer than advertised record lengths at slower timebases is so the instrument offers the advertised 1 M record length at all timebases.  The formula to calculate the record length for an acquisition is: Time *Sample Rate = Record Length. The design of the MSO 2000 and DPO2000 series has fixed sample rate possibilities (e.g. 1GS/s, 500 MS/s, 250MS/s, 125MS/s) and keeps time/div numbers consistent (i.e. 1, 2, 4). So the record length has to change since the other two "variables" in the equation are kept constant (Time*Sample Rate = Record Length where Time is the time on screen or time/div * 10).


FAQ-ID 60256

Alle FAQs ansehen »