Download
Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

DOWNLOADTYP
MODELL ODER SCHLÜSSELWORT

Installing KTTI Communication Modules DMM6510 DAQ6500

Frage:

Installing KTTI Communication Modules DMM6510 DAQ6500

Antwort:

1. Remove the Communication Accessory Cover from the rear panel of the instrument.

2. Insert the Accessory Card into the slot.

3. Line up the black connector on the rear of the card with the two tabs on the PCB inside the instrument.

4. Press firmly until the tabs are seated in the connector of the accessory card.

5. Tighten the screws on the accessory card panel to the rear panel of the instrument.

 


FAQ-ID 714366

Alle FAQs ansehen »