How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?

Question:

How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?

Answer:

The best answer on how to do receiver SATA testing with an AWG is to look at the Method of Implementation (MOI). This can be found here MOI. This guide will walk through all the manual tests that are needed and performed for compliance testing. Please note that RSG testing requires many scope options including the error detector option (ERDDT). This opton is only allowed on the 70000B series scope or higher.

For a general demonstration of SATA RSG testing please watch the video below. 

This FAQ Applies to:

Product Series: MSO/DPO70000

Applications: Storage, SATA/SAS

Product: DPO70804B, DPO70804C, DPO71254B, DPO71254C, DPO71604B, DPO71604C, DPO72004B, DPO72004C, DPO72504D, DPO73304D, MSO70804, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MSO72004C

FAQ ID : 64701

View all FAQs »
Downloads
Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

Go to top