FAQs – Häufig gestellte Fragen

FAQ FAQ-ID Sort ascending
How do I find the IP address for a 2450-NFP?

Your TCP/IP v4 settings should be set to

Diese FAQ bezieht sich auf:
What are the current shunt resistors in the current measurement function?

There are two shunt resistors.

One is  5.1 ohms for the 20mA range and the other is 0.1 ohms for the 100mA, 1A, and 3A ranges.

Diese FAQ bezieht sich auf:
2700, 2700/7700, 2701, 2750
Settings saved on Model 6517B when updating firmware.

Yes, settings can be saved using the foll

Diese FAQ bezieht sich auf:
Differences between TCP202 and TCP202A

Differences are:

1. The jaw size of TCP202 is 3.8 mm while the jaw opening for TCP202A is 5 mm.

2. The TCP202A is rated for 150 V Cat on bare wire.

Diese FAQ bezieht sich auf:
TCP202, TCP202A
Size of TRCP current probe loops

The size of the loops are given in this document.

Diese FAQ bezieht sich auf:
TRCP0300, TRCP0600, TRCP3000
AFG3000B and AFG3000C differences

There at two differences.

1. The AFG3000C models the display was changed to TFT LCD which has a better viewing angle and brighter display.

2. And two new models were added. AFG3051C and AFG3052C.

Diese FAQ bezieht sich auf:
AFG3011C, AFG3021B, AFG3021C, AFG3022B, AFG3022C, AFG3051C, AFG3052C, AFG3101C, AFG3102C, AFG3151C, AFG3152C, AFG3251C, AFG3252C
Differences in the AFG1022 and AFG3022C

1. AFG1022 channel 2 is a continues signal only no modulation, burst, or sweep.  AFG3022C has full function on both channels.
2. AFG1022 Phasing of channel 1 and 2 is only available on for Sine wave below 1 MHz.  AFG3022C has phase control on any signal type and frequency.

Diese FAQ bezieht sich auf:
AFG1022, AFG3022C

How to Use a Link Partner in Testing with TDSET3 */
Diese FAQ bezieht sich auf:
DPO4ENET, DPO5034B, DPO5054, DPO5054B, DPO5104, DPO5104B, DPO5204, DPO5204B, DPO70404, DPO70404B, DPO70404C, DPO7054, DPO70604, DPO70604B, DPO70604C, DPO70804, DPO70804B, DPO70804C, DPO7104, DPO71254, DPO71254B, DPO71254C, DPO71604, DPO71604B, DPO71604C, DPO72004, DPO72004B, DPO72004C, DPO72304DX, DPO72304SX, DPO72504DX, DPO7254, DPO73304DX, DPO73304SX, DPO7354, DPO75002SX, DSA70404, DSA70404B, DSA70404C, DSA70604, DSA70604B, DSA70604C, DSA70804, DSA70804B, DSA70804C, DSA71254, DSA71254B, DSA71254C, DSA71604, DSA71604B, DSA71604C, DSA72004, DSA72004B, DSA72004C, MSO5034, MSO5034B, MSO5054, MSO5054B, MSO5104, MSO5104B, MSO5204, MSO5204B, MSO70404, MSO70404C, MSO70604, MSO70604C, MSO70804, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MSO72004C, MSO72304DX, MSO72504DX, MSO73304DX, Opt. 5-SRENET, Opt. ET3, Opt. SR-ENET
Could the number of analog channel be upgraded on the 5 series MSO?

No.  The analog channel count is fixed at the initial purchase.

Diese FAQ bezieht sich auf:
MSO54, MSO56, MSO58
What is the range of the logic threshold supported on the 5 and 6 Series MSO?

The logic threshold can be set between +/-40V with the TLP058 logic probe. Each individual digital channel can be set for its own threshold level.

Diese FAQ bezieht sich auf:
MSO54, MSO56, MSO58, MSO64, TLP058

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

Go to top