FAQs – Häufig gestellte Fragen

FAQ FAQ-ID Sort ascending
KickStart version 2.0.0 compatibility with PC operating systems.

KickStart version 2.0.0 requires a 64-bit Windows Operating System.    This version of KickStart supports Windows 7 and higher.  Keithley recommends that you have at least 8 GB of PC disk space and at least 8 GB of RAM.


Diese FAQ bezieht sich auf:
KICKSTARTFL-BASE
470106
Connecting to the Model 2701 Multimeter / Data Acquisition / Switch System using KickStart version 2.0.0

The Model 2701 is not an LXI-C instrument.  You must manually add its IP address in KickStart.  Click on the “Advanced” section of the Instrument Pane in KickStart version 2.0.0.  Enter the IP address for the Model 2701.


Diese FAQ bezieht sich auf:
2701, KICKSTARTFL-BASE
470101
Does KickStart support RS-232 communication?

No.  KickStart only communicates to instruments connected using USB, GPIB or LAN.


Diese FAQ bezieht sich auf:
KICKSTARTFL-BASE, KICKSTARTFL-HRMA
470096
Adding more SMU instruments to the I-V Characterizer App in KickStart version 2.0.0

Use the “Instruments” button in the I-V Characterizer app toolbar to access the “Add Channels” button to add more SMU instruments to your test.   You can add up to 4 SMU instruments in a single I-V Characterizer app.


Diese FAQ bezieht sich auf:
2400, 2401., 2410., 2420, 2425, 2430., 2601A, 2601B, 2602A, 2602B, 2604B, 2611A, 2611B, 2612A, 2612B, 2614B, 2634B, 2635A, 2635B, 2636A, 2636B, 6430, KICKSTARTFL-BASE
470091
Exporting Data in KickStart version 2.0.0.

Export the reading table as a .csv file or the graph as a .png file using the “Export” button in the Run History menu.


Diese FAQ bezieht sich auf:
KICKSTARTFL-BASE
469991
Why is the throughput on a 1GB interface set to 940 Mbps?

 It is 940 Mbps to accommodate the UDP and TCP overhead for the wrapper around the MPEG payload on a 1 GB interface.


Diese FAQ bezieht sich auf:
VNM-EDGE, VNM-EDGE2, VNM-SABR, VNM-SABR2, VNM-SASI, VNM-SEN, VNM-SEN2, VNM-SGE, VNM-SXG, VNM-VER, VNM-VFY, VNM-VFY2, VNM-VXG
469671
Why would Sentry report discontinuities but not show any associated reason codes for the error?

Not every discontinuity (CC error) will cause a problem in an ES. For example, if a TS packet was dropped in the middle of a video slice, Sentry wouldn’t notice this as long as it can still detect the ‘start code’ progression in the video stream.


Diese FAQ bezieht sich auf:
VNM-EDGE, VNM-EDGE2, VNM-SABR, VNM-SABR2, VNM-SASI, VNM-SEN, VNM-SEN2, VNM-SGE, VNM-SXG, VNM-VER, VNM-VFY, VNM-VFY2, VNM-VXG
469666
What fields / parameters contribute to making calculations for the QoE score?

Audio Buffer Overrun

Buffer timing violation causing buffer overrun and is greater than or equal to 100ms.

Audio Buffer Underrun

Buffer timing violation causing buffer underrun is equal to 0 seconds, meaning that the buffer is empty.


Diese FAQ bezieht sich auf:
VNM-EDGE, VNM-EDGE2, VNM-SABR, VNM-SABR2, VNM-SASI, VNM-SEN, VNM-SEN2, VNM-SGE, VNM-SXG, VNM-VER, VNM-VFY, VNM-VFY2, VNM-VXG
469661
Switch Time between Pulse IV and CV measurements using the 4225-RPM.

The RPM eliminates the need to re-cable a


Diese FAQ bezieht sich auf:
4200A-SCS
469646
Setting up the Model 2400 SMU and 2182A Nanovoltmeter for Delta Mode.

A large source of error when making low resistance measurements (e.g. 1 ohm) is thermal EMFs in the circuit. A technique called Delta Mode reduces the thermal EMFs in the circuit. The delta mode method sources current in one polarity and takes a voltage measurement.


Diese FAQ bezieht sich auf:
2400, 2401., 2410., 2420, 2425, 2425-C, 2430., 2440.
469261
Downloads
Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

Go to top