Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:


PSPL5336 Datasheet

PSPL5336 -- 6 dB Power Splitter, 20 GHz, Datasheet

Die Produkte auf diesem Datenblatt gehören nicht mehr zum Tektronix-Angebot.

Online lesen:

The PSPL5336 6 dB Power Splitter is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals. The output is attenuated by 6 dB. This is an impedance-matched tee that presents a 50 Ω input impedance when both outputs are terminated in 50 Ω. Power splitter tees are built using two 50 Ω resistors and present a 50 Ω impedance only at the input port. The resistors in this tee have 1% tolerance so it has excellent symmetry and very close impedance match to 50 Ω. It has a rise time of 20 ps and bandwidth from DC to >20 GHz.

Typical performance

Frequency responses from 40 MHz to 20 GHz, linear sweep at 2 GHz/div.


Mechanical dimensions



Parameter 1 Description
Rise time ≤20 ps
Insertion loss (-3 dB) DC to 20 GHz
Insertion loss 2, DC 6.02 dB ±0.05 dB maximum
Insertion loss, AC 6.0 dB ±0.05 dB maximum, for f 21 plots
Insertion loss, Asymmetry 0.09 dB, maximum, DC 2
Phase tracking
Delay 180 ps
Input impedance, DC 2 50 Ω, ±3 Ω naximum
S11 Return loss See S11 plots for typical vs. frequency
Maximum input power, average 1 W
Power temperature curve Full power up to +70 °C, linerly derated to 0 W at +125 °C
Peak power 50 W t
Connectors SMA jacks (f)
Warranty One year

1 All parameters listed are typical unless maximum or minimum guaranteed limits are provided.

2 The DC specifications are based upon resistor tolerances and only when used with 50 Ω source and terminations.

Ordering information

Power Splitter, 6 dB