The new features introduced with firmware version 1.6 enable users to:* 1.6.0 Build 360 addresses Quad Link Audio was not functional* Monitor a variety of IP statistics using comprehensive SMPTE2110 measurement sets: SMPTE2110-10: PTP and RTP-Timestamp based “Stream timing” measurements SMPTE2110-20: RTP layer monitoring and Video decoding SMPTE2110-21: Network compatibility model / Virtual receiver buffer model simulation SMPTE2110-30: RTP layer monitoring and Audio decoding SMPTE2110-40: RTP layer monitoring SMPTE2022-7: Seamless packet reconstruction and Path 1 / 2 timing difference measurements* Control the instrument from system management software using NMOS (IS-04/IS-05), SDP Viewer (RFC4566), and API to discover, register, configure inputs, and select the active input for monitoring* Ensure proper SMPTE 2022 and 2110 redundant system operation using seamless switching* Test new or changing facility configurations using optional SDI and ST2110 IP signal generators (Option MP-GEN)* Detect IP packet errors, monitor the packet inter arrival time (PIT), and time stamped delay factor (TS-DF) for ST 2022-6 to allow engineers to observe issues that may cause intermittent loss of Video, Audio, or Data* Adjust trace and graticule brightness using the intensity controls in the display settings* Adjust magnification of the trace in the Vector application using Gain in the settings menu* Verify wide color gamut compatibility using 3D LUT in the Picture application
- Version: V1.6.0 BLD 360
- Software Type: Firmware
- Release Notes: Download PRISM-Release-Notes-for-Firmware-Version-1.6-Build-360-077129307_066189407.pdf
- Release Date:
- Part Number: 066189407
- Installation Instructions: Download Install_066189405_066189407.txt
By downloading, you agree to the terms and conditions of the Software Download Agreement.
For programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the source code from us for a period of three (3) years after download or receipt of the software, by sending a written request to:
Chief Intellectual Property
14150 SW Karl Braun Dr.
Beaverton, OR 97077
This offer is valid to anyone in receipt of this information.
Your request should include: the name of the product, (ii) your (company) name, and (iii) your return mailing and email address (if available).
Please note that we may charge you a fee to cover the cost of performing this distribution.
This software applies to: MPI, MPX